when did ford stop making the 6.0 diesel

When Did Ford Stop Making The 6.0 Diesel? The 6.0L Power Stroke, was used in Ford Super Duty trucks until the 2007 model year but lasted until 2009 in the Ford Econoline vans (model year 2010) and in the Ford Excursion SUVs until after the 2005 models when Ford discontinued Excursion production.

What year did Ford 6.0 diesel have problems? If you drive a 2003 to 2007 Ford Superduty Diesel truck with the 6.0L Powerstroke engine, we hate to say it here at Moose Jaw Truck Shop but you’ve probably had some problems with it.

Is the Ford 6.0 L diesel a good engine? The 6.0L is a good engine when it is running properly. It has one main failure that is commonly overlooked and is the cause of most of the big issues this engine has. The oil is the life blood of the 6.0L diesel as the injectors are hydraulically actuated using engine oil to drive them.

Is a 6.0 or 7.3 diesel better?

From a reliability, durability or simplicity standpoint, the 7.3L is hands down the winner. When it comes to horsepower, drivability and meeting modern day emissions standards, the 6.0L has it beat. Ultimately, both engines have their pros and cons.

What powerstroke to avoid?

What Years Are Ford Diesel Engines To Avoid? This Ford Super Duty six came out between 2003 and 2007. As far as diesel trucks go, 0L can be said to be the most horrendous. Powerstrokes with 0L capacity are notorious.

What is the life expectancy of a Ford 6.0 diesel engine?

HPOPs probably last a few hundred thousand and cost a couple grand to replace. The bottom end should go 500k to a million miles, and given how long they last, used ones are kind of cheap if you need one. I’ve read about high mileage 6.0s that still have nice cylinder bores.

What years are Ford diesel engines to avoid?

Ford SuperDuty Diesel Truck Problems: Fixing Them From 2003-2007. In my experience, most diesel lovers avoid buying the 2003 to 2007 model-year Ford Superduty diesel trucks. The 6. Powerstroke 0L produces problematic power when used in large quantities.

How long does a bulletproof 6.0 last?

But they will give you a solid 50,000-80,000 miles, especially with proper fluid changes. A Ford oil cooler is ~$300 and labor at 10 hours is ~$800. Needless to say, you can do a lot of Ford oil cooler changes for one Bulletproof oil cooler. Odds are you won’t own the truck long enough to worry about the next cooler.

How much horsepower can a 6.0 Powerstroke handle?

Even a decade ago, before PCM tuning was anywhere near as refined as it is now, several 6.0L owners proved the 6.0L’s bottom end could withstand 700-rwhp. Today, a lot of serious enthusiasts conclude that the 800 hp 6.0 Power Stroke range gets you into unchartered waters with a 6.0L.

How much horsepower does a 6.0 Powerstroke have?

The 6.0L Powerstroke produces 325 horsepower and 560-570 lb/ft of torque depending on model year. Not only was the Powerstroke more powerful than ever before, but it also featured a variable geometry turbocharger for the first time, offering the best throttle response times yet.

What is the problem with 6.0 Ford Powerstroke?

The 6.0L Power Stroke fuel injection system operates on oil pressure, very high oil pressure. Problems with the HPOS are oil leaks (internal to the engine) due to failed/deteriorated O-rings that are caused by excessive oil temperatures (bad oil cooler) and high pressure.

How much horsepower does a 2006 6.0 Powerstroke have?

A Power Stroke 6.0-liter turbo-diesel V-8 yields 325 hp and 570 pounds-feet of torque.

What year did Ford stop making the 7.3 diesel?

Production of the 7.3 Liter Power Stroke engine ceased in 2003 in order to meet emission regulations.

What is needed to BulletProof a 6.0 Powerstroke?

The fine folks at BulletProof Diesel define 6.0L Power Stroke as being “bulletproofed” when it has at least four of the five main problem areas addressed. These five areas are: Oil cooler, EGR cooler, head studs, fuel injection control module (FICM), and water pump.

What is a 7.3 Powerstroke?

The 7.3L Powerstroke is one of the most reliable Diesel engines ever produced. It’s so reliable even die-hard Cummins and Duramax enthusiasts acknowledge it’s widespread success. This makes them one of the most sought after diesels today.

Who built the 6.0 Powerstroke?

In mid-2003, Ford replaced the 7.3L with a 6.0L diesel that was also developed by Navistar.

What years was the 6.0 Powerstroke?

The 6.0L Power Stroke, was used in Ford Super Duty trucks until the 2007 model year but lasted until 2009 in the Ford Econoline vans (model year 2010) and in the Ford Excursion SUVs until after the 2005 models when Ford discontinued Excursion production.

How long do 6.0 injectors last?

With proper care and maintenance of the engine, you can expect a diesel injector to last between 200,000 and 300,000 kilometres.

Are 6.0 Powerstroke reliable?

While they aren’t perfect, the 6.0L’s injectors are reliable when treated to proper maintenance (regular oil changes and new fuel filters), clean fuel, and fed sufficient supply pressure from the lift pump. However, if coolant makes its way into the oil, they can head south quickly.

How many miles will a 5.9 Cummins last?

The Cummins brand is extremely reliable and prides itself on long-lasting engines. The 5.9-liter engine can expect to churn out 300,000 to 400,000 miles.

How long do f250 diesels last?

Ford’s Power Stroke diesel V8 often lasts even longer than its gasoline-powered engines. According to ProSource Diesel, diesel pickup engines sometimes last for 500,000 miles or more. But a diesel-powered Ford F-250 is considered high mileage anywhere over 350,000 miles.

Is the Ford 6.7 diesel engine good?

Take out the emissions systems and the 6.7 Powerstroke is a very reliable engine. Even with the few common problems the 6.7L Power Stroke should be good for 250,000+ miles. Maintain your Ford 6.7L engine well and chances are it will reward you with a great overall experience.

What does deleted mean on a diesel?

Some diesel owners are opting to “delete” these pollution-control components instead. A diesel delete involves taking out the DEF system, removing the catalytic converter and DPF, and installing a new exhaust. The vehicle’s ECU (engine control unit) will also have to be reprogrammed using a tuner.

Trafficautodriving Scroll to Top