is the toyota 4.0 v6 a good engine

The Dual VVT-i 4.0 V6 engine found in the 09+ models is smooth, quiet, and reliable with engine longevity easily reaching over 200,000 miles (320,000 km). It’s no secret that regular maintenance and using high-grade oils and lubricants is the key to reliability on almost any engine.

How long does a Toyota V6 last? 4 Wheel Drive Guide tells us that a well-maintained Toyota V6 engine can last 300,000 miles or longer. While they have had some reports of cracked cylinder heads and faulty water pumps, those issues were fairly sporadic and not a widespread defect.

What is the most reliable Toyota engine? Toyota’s 2ZZ-GE engine is the most reliable. One of the most common engines of the early 21st century is the petrol unit. Toyota’s 2ZZ-GE engine is the most reliable.

How good are Toyota V6 engines?

Toyota V6 Engines Deliver More Power They can be less expensive to build than larger engines, and weigh less, which helps achieve better fuel economy. The four-cylinder is also highly fuel efficient, and generates horsepower output that’ll nicely serve the needs of most drivers.

How much horsepower does a 4.0 Toyota Motor have?

It has a bore and a stroke of 94 mm × 95 mm (3.70 in × 3.74 in). Output is 236 hp (176 kW; 239 PS) at 5200 rpm with 266 lb⋅ft (361 N⋅m) of torque at 4000 rpm when tuned for 87 octane, and 240 hp (179 kW; 243 PS) at 5200 rpm with 278 lb⋅ft (377 N⋅m) at 3700 rpm when tuned for 91 octane.

Is Toyota 3.5 V6 a good engine?

Overall, it’s a reliable engine. However, there are other possible issues the 3.5L V6 may run into. This is especially true as any engine ages and wear and tear components reach the end of their intended lifespan.

Does Toyota 4.0 V6 have a timing belt?

Models powered by 270 hp 4.0-liter V-6 are equipped with timing chains, while those powered by a 268 hp 4.7-liter V-6 have timing belts.

Do timing chains need to be replaced?

When does a timing chain need to be replaced? The timing chain normally needs to be replaced between 80,000 and 120,000 miles unless there is a specific problem. … If driving an older vehicle, or one with close to 100,000 miles, it is recommended to look for symptoms of the timing chain going bad or failing.

Does a 2011 Toyota Tacoma V6 have a timing belt or chain?

The 2011 Toyota Tacoma has a timing chain, which is standard for Toyota since 2005.

When should a timing belt be replaced on a Toyota Tacoma?

Most timing belts will need to be replaced as part of regular maintenance every 60,000 to 100,000 miles, and most related problems are caused by not replacing it when you’re supposed to. If the timing belt is starting to go bad, the engine will run poorly and the check engine light will likely come on.

Do Tacoma timing chains need to be replaced?

There is no recommended service interval for a timing chain because they are designed to last the lifetime of the vehicle. If you hear rattling or your engine is suffering performance problems, you may remove the cover and check the timing chain for excessive play, damage, or wear.

Are 2012 Tacomas reliable?

A reputation for sturdy build quality and excellent reliability also puts the Tacoma on par with many of its full-size competitors. For 2012, the Tacoma also takes a clear lead in the arena of in-car electronics, adding Toyota’s new Entune services to the options list.

How many miles will a 2012 Tacoma last?

Standard cars are known to last up to 200,000 miles, while a well-maintained Toyota Tacoma will last far past 300,000 miles.

Are 2013 Tacomas reliable?

The 2013 Toyota Tacoma pickup has a reliability score of 4.5 out of five from J.D. Power, which is excellent for the auto industry as a whole.

How is 2012 Tacoma?

Test drivers said the base 2012 Tacoma has a smooth ride and composed handling, and added that the X-Runner trim, which has a sport-tuned suspension system, has very agile handling. According to reviewers, models with the TRD off-road package are capable off-roaders, but have a less forgiving ride over broken pavement.

How much did a 2012 Tacoma cost new?

The base MSRP for the 2012 Tacoma will range from $16,875 for the Regular Cab 4×2 equipped with a 2.7-liter four-cylinder engine and five-speed manual transmission, to $27,835 for the Tacoma Double Cab 4×4 long bed with a 4.0-liter V6 and five-speed automatic, reflecting price increases ranging from $10 to $645.

What’s the average price of a 2012 Toyota Tacoma?

The 2012 Toyota Tacoma compact pickup is available in 20 distinct model configurations with a Manufacturer’s Suggested Retail Price (MSRP) that ranges from a low of about $17,500 for a 2-wheel-drive Regular Cab to more than $33,000 for a nicely equipped 4-wheel-drive long-bed Double Cab model.

Trafficautodriving Scroll to Top