how to turn off maintenance required light on honda accord

How To Turn Off Maintenance Required Light On Honda Accord? To reset your 2004 honda accord’s maintenance light, turn the key to the “on” position in the ignition and then turn it off. Depress the odometer trip -b? Button, and hold it down while you turn the key to the “on” position again. The light should go off.

How do you reset the maintenance required light on a 2004 Honda Accord? To reset your 2004 honda accord’s maintenance light, turn the key to the “on” position in the ignition and then turn it off. Depress the odometer trip -b? Button, and hold it down while you turn the key to the “on” position again. The light should go off.

Why is the maintenance required light on my Honda Accord?

The Maintenance Required light on your vehicle comes on after a specific mileage has been driven once the light has been reset. When this happens you will need to follow your owners manual and see what service is due for the mileage of the vehicle.

How do you reset the oil maintenance required?

Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

What does it mean when your maintenance required light stays on?

It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop. … Sometimes the technicians who change the oil in your Toyota vehicle forget to reset the maintenance required light, so you might need to do it manually.

Why is my maintenance required light still on after oil change?

If your maintenance required light is on. It’s because your car thinks it’s gone over a set amount of miles without changing the oil. If you’ve had your oil changed and it’s still on. That’s because whoever changed your oil didn’t reset the light.

Why is my oil light flashing on my Honda?

If it starts flashing, it indicates that the oil pressure dropped very low for a moment, then recovered. If the indicator stays on with the engine running, it shows that the engine has lost oil pressure and serious engine damage is possible.

How do you reset the oil light on a Honda?

Press and hold the “Select/Reset” button for 10 seconds. The Engine Oil Indicator light will begin to blink. If your display reads “Engine Oil Life,” select the Reset mode by pressing the Info button on the steering wheel. Then press the “Select/Reset” button to return your oil life to 100%.

Why won’t my oil light go off?

If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.

How do you turn off the maintenance required light on a 2001 Honda Accord?

To reset the maintenance light in a 2001 honda accord, put the key in the ignition to the on position with the engine off. Hold the reset button by the odometer for 10 seconds. You should see the maintenance light blink. Start the car after this and the light should be off.

Trafficautodriving Scroll to Top