how to reset honda accord after oil change

How To Reset Honda Accord After Oil Change? Press the “SELECT/RESET” stem until the Engine Oil Life is displayed. Press and old “SELECT/RESET” for 10 seconds, then release the stem. Press an hold “SELECT/RESET” for 5 more seconds. Turn the ignition off, then back on.

How do you reset the odometer on a Honda Accord after an oil change? Press the “Select/Reset” button located on either your steering wheel or as a knob on your dashboard. Depending on your model, either scroll through or press the knob repeatedly until “Engine Oil Life” or “Engine Oil Indicator %” is displayed. Press and hold the “Select/Reset” button for 10 seconds.

How do I get my Honda Accord out of maintenance mode?

Turn on the car, (or if already on), then turn it off, within 60 seconds perform the following: Turn Ig-ON but not the engine, do this by pressing the Start button twice without depressing the brake pedal. Depress the gas pedal two times all the way to the floor.

How do you reset the oil life on a 2010 Honda Accord?

To reset the oil life indicator in the 2010 honda accord, turn the ignition to the on position. Then, press and hold the reset or select button for ten seconds. Release and hold again for five seconds.

Can you drive on maintenance mode?

Our advice is that you do not drive in the maintenance mode unless it is an emergency. If you drive your car in maintenance mode be very careful. The vehicle will idle, traction and other self-preservation and components will be disabled.

How do I reset my Honda sensing?

Just press and hold the interval button, which is marked by a car with four bars behind it until you see Cruise Mode Selected appear on the instrument panel. Then, press and hold the interval button one more time to reset the system.

How do you reset the oil life on a Honda Fit?

Press and hold the SELECT/RESET button for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100.

Trafficautodriving Scroll to Top