how to check coolant 2009 toyota rav 4

Zerex 1 Gallon Red 50/50 Coolant/Antifreeze.

What kind of coolant does a 2009 Toyota RAV4 take? Zerex 1 Gallon Red 50/50 Coolant/Antifreeze.

Where is the coolant on a RAV4? Locate the coolant tank in the engine cavity. This is a large, clear tank full of pink fluid positioned in front of the engine on the passenger side.

What kind of coolant does a Toyota RAV4 take?

ZEREX – G05® 50/50 Ready-to-Use Antifreeze / Coolant, 1 Gallon (Part No. ZXG05RU1)

What is the pink fluid in RAV4?

The pink-colored antifreeze is Toyota’s version of 50/50 coolant and is meant to have a super long life. It is considered a “new generation of ethylene glycol-based premium engine coolant.” This coolant is available through your local Toyota dealer.

How do you check Toyota coolant?

You can get a quick check of the level by looking at the markings on the side of the reservoir. Should the liquid hit the “full” marking line, you’re all set. If it falls short of that, remove the radiator cap and add in the coolant or a 50/50 mix of coolant/water.

Why is Toyota coolant red?

The pink coolant is an OAT (organic acid technology) that typically has a longer service life. The red coolant on the other hand is an IAT (inorganic acid technology) that is considered to be more “conventional” but still longer lasting than some other coolants on the market.

How often should Toyota coolant be changed?

How often should you change coolant in a Toyota? Typically, you should have your Toyota coolant flush completed each 30,000 miles or each two years. There are some instances where your vehicle can go without a flush for a longer period of time.

What color is Toyota coolant?

What color coolant does Toyota use? It’s important to understand that color doesn’t matter. While most Organic Acid Technology (OAT) coolants are commonly orange, yellow, red or purple, Hybrid Organic Acid Technology (HOAT) coolants are orange and yellow.

What type of coolant is used by Toyota?

Genuine Toyota Super Long Life Antifreeze/Coolant is a new generation ethylene glycol based coolant which is pre-diluted 50:50 with de-ionized water for freeze protection to -34°F.

What is the process to check antifreeze coolant level?

To check coolant levels, you don’t have to open the radiator cap; check the markings on the side of the reservoir. If the coolant reaches the “full” mark, you’re okay. If it doesn’t, remove the radiator cap and add the coolant or a 50/50 mix of coolant and water.

Is coolant in the radiator?

Car coolant is located in a reservoir affixed to the radiator before it’s introduced to the engine block and its components. Engine coolant is used in conjunction with a liquid cooling system. … The water pump, or coolant pump, circulates coolant throughout the system. The radiator conducts heat away from the coolant.

Can you add water to Toyota coolant?

so, better to use coolant + Distilled Water. Originally Answered: Can I add water to an engine coolant? Yes, but it will reduce the ability of the coolant to resist freezing and corrosion. In an emergency add as much water as required, but have the system drained and refilled as soon as possible.

Can I add coolant straight to the radiator?

On all vehicles that have a reservoir you add it to the reservoir, unless it is totally empty, then you can add it to the radiator directly. Once the radiator is full you will want to finish topping it off through the reservoir. If you just need to add because it is loww, then always use the reservoir.

Why is my radiator full but reservoir empty?

This is normal. You want to keep air out of the system so you start with a half full reservoir when cold…..as the car heats up and the coolant expands some is sent to the reservoir. When you turn the car off and things cool, it sucks coolant out and back to the radiator.

Can you lose coolant without a leak?

Loss of the liquid can lead to the overheated condition but overheating can also contribute to the coolant loss. … Some other things that can cause the losing coolant but no leak are driving uphill, hauling heavy loads, A faulty exhaust gas recirculation (EGR) system, and a worn-out water pump.

Should I put coolant in my radiator or reservoir?

If your engine is cold, the coolant level should be up to the cold fill line. … If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water.

How long do I run the engine after adding coolant?

“Your personal safety is most important,” he says. “Waiting for at least 15 minutes allows the hood, engine and leaking coolant to cool.”

Why does my engine coolant keep disappearing?

Disappearing engine coolant could be the result of a slightly cracked hose, a tiny hole in your radiator, or a water pump issue. It’s also possible for a coolant leak to develop inside your vehicle or to simply vaporize into mist via your defroster. … Check the underside of your radiator for dampness as well.

Why is my car still overheating after adding coolant?

Your car uses a combination of air from the moving car and air blown onto the radiator by the cooling fan. When this air flow is blocked, the coolant isn’t able to properly cool off before being exposed to more heat. If the problem is severe enough, the coolant will boil and the engine will overheat.

Trafficautodriving Scroll to Top