how fast does a ford gt 427 go

How Fast Does A Ford Gt 427 Go? The GT40 Mk II was powered by a big-block 7.0 liter (427 cubic inch) V8 borrowed from the Ford Galaxie. This engine made as much as 485 horsepower, depending on how it was tuned. A change in racing regulations in 1968 led to a reduction in maximum engine capacity to 5.0 liters.

How much horsepower did the 427 GT40 have? The GT40 Mk II was powered by a big-block 7.0 liter (427 cubic inch) V8 borrowed from the Ford Galaxie. This engine made as much as 485 horsepower, depending on how it was tuned. A change in racing regulations in 1968 led to a reduction in maximum engine capacity to 5.0 liters.

How much horsepower can you get out of a Ford 427? How Much Horsepower Does A Stock 427 Make? According to its official engine ratings, Ford’s 427 SOHC had 616 HP at full capacity by a 4V carburetor, followed by 657 HP by dual quads engines.

Did Ford make a 427 Cobra Jet?

The car automatically became a Super Cobra Jet. The package included special capscrew-type connecting rods borrowed from the Ford GT Mark IV 427 Le Mans engine. A different crankshaft and forged-aluminum pistons were also included. Even an external oil cooler was part of the deal–not bad for $6.53.

Who built the 427 engine?

Ford Motor Company had been working to develop and perfect a 7-liter 427 cubic inch engine. Lunn and his team had worked an engineering marvel to fit the larger engine in the mid-engine car while retaining aerodynamic integrity.

What did the 427 come in?

History. Chevy started using the 427 big block as a production engine in 1966—an engine with a diverse range of power depending on a particular vehicle or application. The 427 lived in both station wagons and as well as Corvettes and Camaros.

How many liters is a 427 engine?

The highly successful and versatile 427 cu in (7.0 L) version of the Mark IV engine was introduced in 1966 as a production engine option for full-sized Chevrolets and Corvettes.

How much horsepower does a 427 side oiler have?

So just how good was this new side-oiler 427? The answer: almost too good. With a gnarly 12.5:1 compression ratio, the 427 made upward of 475 horsepower, and made it all day long with these improvements to the rotating assembly and oiling.

Can a Mustang beat a Ferrari?

Ferrari rates the car for a top speed of 211 mph and a 0-62 mph time of 2.9 seconds. After watching the GT500 beat up on most of the other cars it has raced against, we guess it was time for it to get beat. The Ferrari put down a quarter-mile time of 10.5 seconds at 138 mph to the Mustang’s 11.4 seconds at 132 mph run.

Is a Ford 427 a big-block?

The Ford 427 engine is considered a big block engine with a displacement of nearly 7.0 liters. After the gas crunch of the ’70s, the big block engines nearly vanished as manufacturers were required to produce commuter cars with improved fuel economy.

How fast is a Ford Mustang?

What is the top speed for a Ford Mustang? The regular Mustang with a V6 engine is capable of reaching the electronically limited top speed of 155 mph. The Shelby models have a limit raised to 175mph, while the latest Shelby GT500 will have a top speed of 180 mph.

Is the Ford GT fast?

Accelerating to 60 mph takes a scant 3 seconds, and Ford says the GT tops out at 216 mph. Highway 1 during Monterey Car Week is hardly the place to test either of those claims, but after a couple of hard throttle stomps and a few fast corners, there’s no doubt in my mind the GT is a riot.

What is the top speed of Ferrari?

Maximum Speed 211 mph 340 km/h.

What is the difference between a Ford 427 and 428?

The 428 had a bore of 4.13″ and a stroke of 3.98″ and was produced from 1966 to 1970. Because of the long throw, the 428 was more of a low rpm / torque motor were as the 427 was a high rpm race motor. 428’s never had cross bolted mains, unlike the 427 (and a few 406’s).

Did Ford ever put a 427 in a Mustang?

Did Ford Ever Put A 427 In A Mustang? None. This particular version of the Mustang was never offered as an option in the factory. A real pain to make, the 427 (4th quarter displacement was just shy of 425 cubic inches) were designed originally by Ford for their racing division.

Is it 428 or 429 Cobra Jet?

’71 Cobra Jet The 429 was Ford’s state-of-the-art replacement for the FE-based 428, a design that had been around since 1958. Debuting as a passenger-car engine in ’68, the 429 had a skirtless block, like the small-block 289s and 302s, and canted-valve heads, similar to the 351 Cleveland, for improved breathing.

How much is a Ford 427 worth?

How Much Is A 427 Ford Engine Worth? The price range for the 427 SOHC engines is $35,000-38,000.

Why did Ford stop making the 427?

NASCAR officials were flummoxed by Ford’s Cammer and went to great lengths to ban the engine from the series after concerns about an influx of what it termed ‘special racing engines.

Is the 427 a good engine?

L71 & L72 427 Performance Potential While slightly less performance oriented than the L88 and ZL1, the L71 and L72 were still highly capable engines. Producing 425 gross horsepower and doing 0-60mph in 5.6 seconds, these engines were top of the line with respect to performance back in the late 60’s.

How much does a 427 engine cost?

How Much Is A 427 Ford Engine Worth? Nostalgia 427 SOHC engines go for approximately $35,000 – $40,000 apiece.

Is a Chevy 427 a good engine?

Once tuned right, the 427 ZL1 was good for over 500 horsepower and was used in many famous race cars such as the McLaren and Chaparral. Today you can still find a lot of performance engine parts for the Chevy 427 that can easily push the engine over 500 horsepower for a relatively low price.

How many liters is a 454 engine?

For many years the 454 (7.4-liter) V8 was the top choice from GM, while Ford had the mighty 460 (7.5-liter) V8.

Trafficautodriving Scroll to Top