How Bad Is The Ford 6.0 Diesel? The 6.0L is a good engine when it is running properly. It has one main failure that is commonly overlooked and is the cause of most of the big issues this engine has. The oil is the life blood of the 6.0L diesel as the injectors are hydraulically actuated using engine oil to drive them.
Is the Ford 6.0 diesel a good engine? The 6.0L is a good engine when it is running properly. It has one main failure that is commonly overlooked and is the cause of most of the big issues this engine has. The oil is the life blood of the 6.0L diesel as the injectors are hydraulically actuated using engine oil to drive them.
What’s so bad about the 6.0 Powerstroke? The 6.0L Power Stroke fuel injection system operates on oil pressure, very high oil pressure. Problems with the HPOS are oil leaks (internal to the engine) due to failed/deteriorated O-rings that are caused by excessive oil temperatures (bad oil cooler) and high pressure.
What is the life expectancy of a Ford 6.0 diesel engine? HPOPs probably last a few hundred thousand and cost a couple grand to replace. The bottom end should go 500k to a million miles, and given how long they last, used ones are kind of cheap if you need one. I’ve read about high mileage 6.0s that still have nice cylinder bores.
Is the 6.0 a bad engine?
This information is for the 95% of us 6.0 owners that just use our trucks for trucks. The big question is: Are the 6.0 Powerstrokes really that bad? To be honest, the answer is absolutely not. They are a great running motor that can be made to be durable if maintained properly.
What year did Ford 6.0 diesel have problems?
If you drive a 2003 to 2007 Ford Superduty Diesel truck with the 6.0L Powerstroke engine, we hate to say it here at Moose Jaw Truck Shop but you’ve probably had some problems with it.
What powerstroke to avoid?
What Years Are Ford Diesel Engines To Avoid? This Ford Super Duty six came out between 2003 and 2007. As far as diesel trucks go, 0L can be said to be the most horrendous. Powerstrokes with 0L capacity are notorious.
How much does it cost to replace a 6.0 diesel engine?
On average, the cost of a 6.0 powerstroke diesel engine rebuild is going to be around $7,500. Or, if you choose to get this engine rebuilt from a parts kit, a parts kit will cost you about $2,165 on average.
What years are Ford diesel engines to avoid?
Ford SuperDuty Diesel Truck Problems: Fixing Them From 2003-2007. In my experience, most diesel lovers avoid buying the 2003 to 2007 model-year Ford Superduty diesel trucks. The 6. Powerstroke 0L produces problematic power when used in large quantities.
What is needed to BulletProof a 6.0 Powerstroke?
The fine folks at BulletProof Diesel define 6.0L Power Stroke as being “bulletproofed” when it has at least four of the five main problem areas addressed. These five areas are: Oil cooler, EGR cooler, head studs, fuel injection control module (FICM), and water pump.
Is 6.0 or 7.3 Powerstroke better?
From a reliability, durability or simplicity standpoint, the 7.3L is hands down the winner. When it comes to horsepower, drivability and meeting modern day emissions standards, the 6.0L has it beat. Ultimately, both engines have their pros and cons.
How many miles can a BulletProof 6.0 go?
But they will give you a solid 50,000-80,000 miles, especially with proper fluid changes. A Ford oil cooler is ~$300 and labor at 10 hours is ~$800. Needless to say, you can do a lot of Ford oil cooler changes for one Bulletproof oil cooler.
Which Ford Powerstroke engine is the best?
#2 – 6.7L Power Stroke – (Best Ford Diesel Engine) Ford’s 6.7L diesel served as the first engine of Power Stroke lineage not to be produced by International Navistar.
What was the best year of the 6.0 Powerstroke?
05-07 are considered the better years for the 6.0. There’s really no reason to look at anything older than 05 unless you really want a 7.3 or the price is amazing.
How hot is too hot for 6.0 Powerstroke?
It is really too hot for continuous service when the temperature is over 220*F – most likely something is not right when the temperature is constantly above that level. For more than 30 minutes, keep the temperature below 250*F.
How much horsepower can a stock 6.0 Powerstroke handle?
Even a decade ago, before PCM tuning was anywhere near as refined as it is now, several 6.0L owners proved the 6.0L’s bottom end could withstand 700-rwhp. Today, a lot of serious enthusiasts conclude that the 800 hp 6.0 Power Stroke range gets you into unchartered waters with a 6.0L.
What years was the 6.0 Powerstroke?
The 6.0L Power Stroke, was used in Ford Super Duty trucks until the 2007 model year but lasted until 2009 in the Ford Econoline vans (model year 2010) and in the Ford Excursion SUVs until after the 2005 models when Ford discontinued Excursion production.
What is Ford’s most reliable diesel engine?
The 7. As the most reliable engine, the 3 liter Powerstroke is easy to operate when it isn’t filtered to prevent emissions. As a result, the reliability of the 7 has been enhanced. Powerstrokes with 3 liter fuel are sometimes found in pickups such as the 2000 Ford F-250.
How much does it cost to bulletproof a 6.0 Powerstroke?
Install can run about $700-1,000 so the upgrade can cost upwards or beyond $3,000 all in. Compare that to a factory Ford 6.0 Power Stroke oil cooler for about $300. Add in labor and you can still replace the factory oil cooler about 3x before the bulletproof 6.0L oil cooler upgrade is worth the cost.
How much does a diesel engine rebuild cost?
Average replacements of diesel engines cost between $5,500 and $11,000. A diesel engine rebuild will cost between $3,000 and $4,500, whether it’s a replacement or a rebuilt engine.
How much does a 7.3 Powerstroke engine cost?
The 7.3-liter V8 was posted to the Ford Performance website this week as part number M-6007-73, available for a cool $8,150. That’s not necessarily cheap, but then again, you’re getting a lot for the money. Ford’s Godzilla engine is no slouch when it comes to its construction.
What are the issues with the 6.0 Powerstroke?
Other 6.0L Powerstroke problems include HPOP failure, injector stiction, FICM failure, and clogging oil coolers. Fortunately, once these problems are addressed, the trucks are much more reliable. Some of these problems can be avoided.
What year is the best Ford Powerstroke?
In terms of Ford Super Duty trucks, models 2012 and any models since 2013 or newer, as well as 2017 models, have the best value, but 2017 versions had a couple of problems… In light of the 2008-10, 2009, 2010, and 2011 Ford Super Duty trucks, you will need to stay out of them.
Are Ford diesels reliable?
Ford’s 6.7L Power Stroke diesels are solid engines, extremely durable, and reliable, with only a few problems/issues. One of the big improvements in term of reliability is that the 6.7L Power stroke no longer would rely on four bolts per cylinder holding down the cylinder heads.
What does deleted mean on a diesel?
Some diesel owners are opting to “delete” these pollution-control components instead. A diesel delete involves taking out the DEF system, removing the catalytic converter and DPF, and installing a new exhaust. The vehicle’s ECU (engine control unit) will also have to be reprogrammed using a tuner.