Do Ford 6.0 Diesel Break Down After Bulletproofing? But they will give you a solid 50,000-80,000 miles, especially with proper fluid changes. A Ford oil cooler is ~$300 and labor at 10 hours is ~$800. Needless to say, you can do a lot of Ford oil cooler changes for one Bulletproof oil cooler. Odds are you won’t own the truck long enough to worry about the next cooler.
How long does a bulletproof 6.0 last? But they will give you a solid 50,000-80,000 miles, especially with proper fluid changes. A Ford oil cooler is ~$300 and labor at 10 hours is ~$800. Needless to say, you can do a lot of Ford oil cooler changes for one Bulletproof oil cooler. Odds are you won’t own the truck long enough to worry about the next cooler.
Is a bullet proof 6.0 reliable? But based upon what I’ve read (and it’s been a lot over the past month), I would say that bulletproofing makes the 6.0 a lot more reliable, possibly as reliable as the 7.3 *provided* you perform the maintenance religiously.
How many miles can you get out of a Bulletproofed 6.0 Powerstroke? The bottom end should go 500k to a million miles, and given how long they last, used ones are kind of cheap if you need one. I’ve read about high mileage 6.0s that still have nice cylinder bores.
Can a 6.0 Powerstroke be made reliable?
Bulletproofed 6.0L Powerstroke are trucks that have already had the significant, necessary improvements made to make the trucks more reliable. Bulletproof kits for a 6.0L Powerstroke cost $2,000-$5,000.
What year did Ford 6.0 diesel have problems?
If you drive a 2003 to 2007 Ford Superduty Diesel truck with the 6.0L Powerstroke engine, we hate to say it here at Moose Jaw Truck Shop but you’ve probably had some problems with it.
How long do 6.0 injectors last?
With proper care and maintenance of the engine, you can expect a diesel injector to last between 200,000 and 300,000 kilometres.
How much is a bulletproof 6.0 worth?
Install can run about $700-1,000 so the upgrade can cost upwards or beyond $3,000 all in. Compare that to a factory Ford 6.0 Power Stroke oil cooler for about $300. Add in labor and you can still replace the factory oil cooler about 3x before the bulletproof 6.0L oil cooler upgrade is worth the cost.
How much does it cost to bulletproof a truck?
Unfortunately, bulletproofing a car will usually cost between $16,000 and $50,000 but can sometimes cost even more. The price is largely based on the size of your car and the areas you’d like bulletproofed. Remember, each panel of bulletproof material costs between $500 and $1,500—and that’s not even counting labor.
What powerstroke to avoid?
What Years Are Ford Diesel Engines To Avoid? This Ford Super Duty six came out between 2003 and 2007. As far as diesel trucks go, 0L can be said to be the most horrendous. Powerstrokes with 0L capacity are notorious.
How long will a powerstroke last?
In addition to Duramax and Cummins engines, Powerstroke engines are found in Ford trucks. They can generally last 500,000 miles per year. In general, Powerstroke engines are classified as having between 350,000 and 500,000 miles of warranty.
How many miles will a Powerstroke diesel last?
Powerstroke engines are found in many Ford trucks and, for more than 500,000 miles, often times can be found among the Duramax and Cummins engines. It is normal to regard a Powerstroke engine’s mileage ranges between 350,000 and 500,000 miles as high as those for Duramax and Cummins engines.
What is needed to BulletProof a 6.0 Powerstroke?
The fine folks at BulletProof Diesel define 6.0L Power Stroke as being “bulletproofed” when it has at least four of the five main problem areas addressed. These five areas are: Oil cooler, EGR cooler, head studs, fuel injection control module (FICM), and water pump.
What years are Ford diesel engines to avoid?
Ford SuperDuty Diesel Truck Problems: Fixing Them From 2003-2007. In my experience, most diesel lovers avoid buying the 2003 to 2007 model-year Ford Superduty diesel trucks. The 6. Powerstroke 0L produces problematic power when used in large quantities.
What does a BulletProof truck mean?
To us, the definition of bulletproof means installing parts and components that allow you to beat on your truck day in and day out—and never hurt anything. It’s not always about simply adding horsepower and twist; it’s about surviving it.
What was the best year of the 6.0 Powerstroke?
05-07 are considered the better years for the 6.0. There’s really no reason to look at anything older than 05 unless you really want a 7.3 or the price is amazing.
How hot is too hot for 6.0 Powerstroke?
It is really too hot for continuous service when the temperature is over 220*F – most likely something is not right when the temperature is constantly above that level. For more than 30 minutes, keep the temperature below 250*F.
How much does it cost to replace a 6.0 diesel engine?
On average, the cost of a 6.0 powerstroke diesel engine rebuild is going to be around $7,500. Or, if you choose to get this engine rebuilt from a parts kit, a parts kit will cost you about $2,165 on average.
When did Ford quit making the 6.0 diesel?
The 6.0L Power Stroke, was used in Ford Super Duty trucks until the 2007 model year but lasted until 2009 in the Ford Econoline vans (model year 2010) and in the Ford Excursion SUVs until after the 2005 models when Ford discontinued Excursion production.
How long do factory injectors last?
With good, quality fuel injectors, you can expect them to last a long time. So, how long do fuel injectors last exactly? Some can be expected to last between 80,000 and 100,000 miles, while the best fuel injectors can last as long as you have your vehicle.
What does studded mean on a Diesel?
Aftermarket studs that go over the Ford head bolts are known as ARP Head Studs. The term “studded” refers to ARP head studs, whereas “non-studded” indicates that your truck is stock. I tow 11.5k without studding and haven’t had any problems. However, the EGR (Exhaust Gas Return) has been removed.
What is a 7.3 Powerstroke?
The 7.3L Powerstroke is one of the most reliable Diesel engines ever produced. It’s so reliable even die-hard Cummins and Duramax enthusiasts acknowledge it’s widespread success. This makes them one of the most sought after diesels today.
Do bulletproof windows roll down?
In other words, can you roll down bulletproof windows after the armoring process takes place? The quick answer is yes.
Is it legal to own an armored vehicle?
It’s completely legal to buy armored vehicles for civilians. These vehicles can withstand various types of ferocious attacks. So these are very helpful to protect you and your family. These cars are available at different costs ranging from $300k to 1.5 million.