can i turbocharge a ford 1989 7.3l diesel

Can I Turbocharge A Ford 1989 7.3l Diesel? Yes, you can put a powerstroke turbo on a 6.9 or 7.3 IDI – Ford Truck Enthusiasts Forums.

Can you add a turbo to a 7.3 diesel? Yes, you can put a powerstroke turbo on a 6.9 or 7.3 IDI – Ford Truck Enthusiasts Forums.

How much boost can a stock 7.3 diesel handle? ‘94.5-’99 7.3L: 380 to 400rwhp Either charger can hold up to 30-35 psi of boost for a while, but 40 psi or more is asking a lot for a turbo that was originally intended to see a maximum of 17 to 23 psi.

How much power can you get out of a 7.3 Idi? The 7.3 Powerstroke is a two-valve behemoth which measures in at 444 cubic inches and has a maximum stock power rating of 275hp and 525lb. ft. of torque.

Does a 7.3 Idi have a turbo?

The 7.3L IDI remained naturally aspirated through the 1992 model year, but a turbocharged option was made available for the 1993 and 1994 model years. The turbocharged variant of the 7.3L IDI was introduced primarily to combat the power loss that naturally aspirated models experienced at altitude.

How do you get 500hp out of a 7.3 Powerstroke?

Aside from adding a chip, a considerable up-sizing of the fuel injectors is mandatory to get any kind of measurable horsepower out of a 7.3L Power Stroke. For us, the only option is to upgrade to a set of hybrid injectors, and specifically the 238cc version for 500hp goals.

What size turbo is on a 95 7.3 Powerstroke?

Registered. It’s not a GT38, it’s a TP 38 on OBS trucks. Its got a 59.8mm compressor inducer, a 1.0 compressor A/R, and a 1.15 exhaust A/R.

What problems does the 7.3 Powerstroke have?

Some of the most common 7.3 Powerstroke engine issues include: Turbocharger Up-Pipe Leaks Have Become Significantly Common. The Diesel Fuel Filter Can End Up Becoming Clogged. Failure Of The Injector Pressure Regulator Is Something To Worry About.

How long will the 7.3 Powerstroke last?

Robust, iron parts, conservative power and low engine speed are the key ingredients for any diesel engine lasting forever—and if a 7.3L has gone unmodified yet been well maintained its entire life, 400,000 to 500,000 miles is virtually guaranteed.

Is the 7.3 Idi a good engine?

The Navistar 7.3L IDI is a reliable diesel engine and known to outlast gasoline engines. It has a B50 life of 350,000 miles, which means about 50 percent of the engines last longer than 350,000 miles.

How much weight can a 7.3 Idi tow?

1994 7.3 IDI towing capacity. 8500lbs Uhaul + 5000lbs Load + 1500lbs trailer + 1500lbs Hot Tub – Ford Truck Enthusiasts Forums.

What year did Ford 7.3 Get a turbo?

The first 7.3 L engines were available as an option for International S-series trucks & school buses. For 1988, it became the sole available IDI engine and was now offered in Ford trucks. For 1993, Ford made available a turbocharged variant of the 7.3 L featuring an internally wastegated AR.

What year 7.3 has turbo?

1993 saw the debut of the 7.3L with a turbocharger. The engine’s internal parts were also upgraded to withstand the turbo boost pressure. Despite the turbo addition, this engine didn’t get much of a power or torque boost.

How much HP does a tuned 7.3 Powerstroke have?

’99-03 7.3L Power Stroke Well-tuned early ’99 trucks typically make 290 to 300 hp, while later models usually make anywhere from 300 to 320 hp (and we’ve even seen one clear 330 hp).

What turbo is on a 7.3 Powerstroke?

7.3L Power Stroke The GTP38R turbocharger contains an exclusive ball bearing cartridge for unbeatable response, efficiency, and durability. Elimination of thrust bearing eliminates Failures at elevated boost levels. The 88mm GT compressor wheel provides 33% more flow than the stock 80mm wheel.

How can I make my 7.3 Powerful?

One of the main ways to increase power is to get more air into the engine as efficiently as possible. However, that air also has to exit the engine efficiently. That’s where 7.3L Power Stroke exhaust mods come into play. An exhaust system will reduce back-pressure which helps increase power and reduce turbo spool time.

What size is a TP38 turbo?

The Comp Turbo TP38 utilizes a wheel similar to the Garrett GTP38R ball-bearing turbo (a popular turbo in the ‘991/2 to ’03 7.3L segment), which has an inducer diameter of 66 mm, and an exducer diameter of 91 mm (bigger than the GTP38R’s 88mm exducer).

What size turbo is a GTP38?

Stock is 60mm inducer, 80mm exducer.

Does a 97 powerstroke have a wastegate?

And no, the 94-97 powerstroke did not have a wastegate.

Can you bulletproof a 7.3 Powerstroke?

The 7.3L Powerstroke is considered by many to be indestructible! Even as bulletproof as 7.3L can be, lack of proper maintenance and stupid mistakes can be the undoing of this of this endurance diesel engine platform.

What powerstroke to avoid?

What Years Are Ford Diesel Engines To Avoid? This Ford Super Duty six came out between 2003 and 2007. As far as diesel trucks go, 0L can be said to be the most horrendous. Powerstrokes with 0L capacity are notorious.

Why is the 7.3 so reliable?

According to, the 7.3 liter Powerstroke is reliable because its design is simple and only uses 6 bolts per cylinder. Another reason trucks with these engines are durable is that they feature a fixed geometry turbo and an oil cooler that is located externally.

What is the difference between a 7.3 IDI and a 7.3 Powerstroke?

The 7.3 IDI is not the same as the 7.3 Powerstroke engine. Despite sharing displacement designations, these engines have numerous differences. The 7.3 Powerstroke is computer-controlled, whereas the 7.3 IDI relies entirely on mechanical parts.

Trafficautodriving Scroll to Top